​How to paint reflective traffic sign plates correctly?

The ordinary road signs we see on the road are usually reflective traffic sign plates. This traditional sign uses the characteristics of the car’s headlights and reflective materials to improve the driver’s recognition of the traffic signs. Reflective traffic sign plate is an indispensable traffic safety facility in life. Reflective traffic sign plates not only show the road location, distance, and travel costs for many traffic travel participants but also create a safe travel environment for us.

Here is the content list:

How to paint reflective traffic sign plates?

What are the precautions when painting reflective traffic sign plates?

How to paint reflective traffic sign plates?

1. Decontaminate and remove dirt from the coated base layer. Use an emery cloth to remove rust. The coated surface should be smooth and free of moisture and oil. 2. Apply two coats of fluorescent primer, and then apply two coats of reflective primer after drying as the base coat. 3. Open the can of the paint painted with reflective traffic sign plates and stir evenly. Clean wooden sticks or iron sticks must be used. After the primer of the coating is dried, apply one coat of paint used to brush the reflective traffic sign plate on the dried primer surface for about 2-4 hours. After the first coat of reflective paint is dry, apply the second coat of paint. 4. After the above two layers of reflective paint are completely dried, apply one layer of reflective varnish to the surface of the reflective paint. After it is fully cured, the reflective traffic sign plate can be used.

What are the precautions when painting reflective traffic sign plates?

1. If the reflective traffic sign plate is painted by hand, high-grade wool brushes must be used. Rollers are not suitable. For large areas, high-pressure airless spraying can be used. 2. Air compression spraying is not suitable for reflective traffic sign plate boards. Because the reflective paint has a high viscosity and is not suitable for dilution, high-pressure airless spraying must be used. 3. Each time the reflective paint is applied to the reflective traffic sign plate board, the paint must be mixed evenly, because the reflective powder in the paint is very easy to precipitate, and the mixing is uneven, and the surface of the paint film after the painting is likely to cause uneven reflective effects. Or the color appears uneven. 4. It is not advisable to paint reflective traffic sign plates on cloudy and rainy days, southerly windy days, and environments where the relative humidity of the air is greater than 80%. 5. The above-mentioned primer, reflective paint, and finishing paint are all cured at room temperature, single-component self-drying species paint, not suitable for baking and curing. 6. Storage of the above-mentioned points should be sealed and stored at room temperature indoors. 7. Common colors for reflective traffic sign plates are red, orange, yellow, lemon yellow, light green, sky blue, etc. 8. Reference brushing dosage: 4-6 square meters/kg (one piece).

In the above content, we provide you with methods to paint reflective traffic sign plates. We hope that you can choose the most suitable product when referring to these methods. The products produced by Wenzhou Xiangying Reflective Material Science & Technology Co., Ltd are sold all over the country, and customers are all over the country. Welcome to come and buy!